TILT COLUMNS WITH SWITCHES
Keeping your dash and column clean is just one of ididit's many concerns, which is why they came up with an ingenious way to put the ignition on the column. You no longer worry about scratching or nicking and still have the ease and accessibility of starting your rod. The ignition switch has standard features of on, off, start, and accessory, all of which can be very useful when perfecting your rod to your own standards. The ignition kit is built right into the column, and also includes the relays necessary to make sure it will carry the load of your electrical system. When considering your new purchase of an ignition chrome or steel column, call your steering column specialists.
For more info go to: www.ididit.com
SIMPLE CHEVY SWING PEDAL
Walton Fabrication offers a firewall-mounted power brake kit for '49-54 Chevy passenger cars. The advantages to this kit are many, including ease of serviceability, correct pedal ratio, and, most importantly, an 8-inch power booster instead of the industry standard 7-inch booster. Designed for easy bolt-in installation and available with an optional mechanical brake switch kit, this is the easy way to have power brakes on your Chevy. Kit includes master/booster combo, firewall plate, brackets, pedal, and installation hardware.
For more info go to: www.waltonfabrication.com
STOCK SPINDLE DISC BRAKES
Improve your vehicle's stopping power while retaining stock ride height with Classic Performance Products' complete stock spindle disc brake kits. Nobody should come up short when it comes to braking performance. All kits work with most 15-inch wheels. Kits include disc brake brackets, rotors, loaded calipers, bearings, seals, dust caps, spindle nuts, hoses, 7-, 8-, or 9-inch power booster, master cylinder and pre-bent hard line kit, and proportioning valve. Upgrades are available, including chrome booster and master cylinder, cross-drilled and slotted rotors, braided brake hoses, and 13-inch rotors. Many CPP kits have a limited lifetime warranty. CPP has been providing the classic Chevy and Ford truck, as well as Chevy passenger car, market with top-quality steering, brake, and suspension components for two decades.
For more info go to: www.classicperform.com
ALUMINUM MASTER CYLINDER
Wilwood's aluminum tandem master cylinder features great looks and outstanding performance in an innovative high-pressure die-cast design that is lightweight and durable. Available in 1- or 1.125-inch bore sizes, each master cylinder is configured with full separation between front and rear reservoir chambers and fluid outlets. Ports on both sides allow for right- or left-hand plumbing and easy installation, and the mounting flange is slotted for compatibility with many OE Chrysler, Corvette, GM, and Ford bolt patterns. A black anodized, machined aluminum cap retains a pressure balance between the chambers with a full bellows gasket for 100-percent sealing against moisture or leakage.
For more info go to: www.wilwood.com
TUBULAR ARMS FOR GM SUBFRAMES
So you installed a GM subframe in your custom rod, and now you find out it's too wide! Fatman Fabrications has been building narrowed control arms for 15 years that are designed to solve that problem. These slick-looking parts come with new bushings and ball joints fitted for easy installation. A molded urethane lower spring mount provides a cushion for NVH (noise, vibration, and harshness) suppression and easy removal for conversion to coilover or Air Ride. A complete line of dropped spindles is also available to allow an easy 2-inch drop if you wish, now that the tires are under the fenders.
For more info go to: www.fatmanfab