 |
 |
|
|
||||||
 |
||||||
|
||||||
| Recommended Sites: Rod & Custom | Street Rodder | Classic Trucks | |||||||||||||||||||||||||||||||
tech | |||||||||||||||||||||||||||||||
1951 Mercury Power Steering Install)
The Jamco template was placed on the inside of the frame and bolted to the stock steering
box location. Easy. Then Randy used a 7/16-inch bit to drill out the forward holes
through the template and the inner framerail only. The rearmost stock steering box bolt
hole was enlarged using the same bit and a rotary file in a die grinder.
|
|||||||||||||||||||||||||||||||
|
Subscribe |
Subscriber Services |
Advertise
Table of Contents | Contact Us | Careers | Privacy Policy Primedia Automotive Group | Site Map |   © 1998 - 2008Source Interlink Media, Inc. All Rights Reserved. |
|||||||||||||||||||||||||||||||
|
07 23 08
|
|
|
